
Metric, UNC, and UNF Conversion Table
Optimas is a full-service supply chain and manufacturing solutions provider. Before designing a new product or updating an existing one, consider partnering with Optimas to leverage our engineering, manufacturing, and supply chain expertise.
The metric bolt conversion chart below acts as a bolt size conversion table to help identify the closest equivalents between metric coarse, metric fine, Unified Coarse, and Unified Fine fasteners. This inch-to-metric thread conversion chart helps engineers and manufacturers determine the correct metric to standard bolt equivalents across different thread systems.
The table can also be used as a bolt conversion chart when comparing common sizes such as M6 to standard, M8 to SAE, or 3/8 bolt equivalents in metric.
Thread sizes are not directly interchangeable. For guidance only.
| Metric Coarse | Metric Fine | BSF/BSW | UNC | UNF |
|---|---|---|---|---|
| M2 x 0.4 | - | - | 1-64 | 1-72 |
| M2.5 x 0.45 | - | - | 3-48 | 3-56 |
| M3 x 0.5 | - | - | 4-40 | 4-48 |
| M3.5 x 0.6 | - | - | 6-32 | 6-40 |
| M4 x 0.7 | - | - | 8-32 | 8-36 |
| M5 x 0.8 | - | - | 10-24 | 10-32 |
| M6 x 1 | M6 x 0.75 | 1/4" | 1/4-20 | 1/4-28 |
| M8 x 1.25 | M8 x 1 | 5/16" | 5/16-18 | 5/16-24 |
| M10 x 1.5 | M10 x 1.25 | 3/8" | 3/8-16 | 3/8-24 |
| M12 x 1.75 | M12 x 1.25 | 1/2" | 1/2-13 | 1/2-20 |
| M14 x 2 | M14 x 1.5 | 9/16" | 9/16-12 | 9/16-18 |
| M16 x 2 | M16 x 1.5 | 5/8" | 5/8-11 | 5/8-18 |
| M20 x 2.5 | M20 x 1.5 | 3/4" | 3/4-10 | 3/4-16 |
| M24 x 3 | M24 x 2 | 1" | 1-8 | 1-12 |
| M30 x 3.5 | M30 x 2 | 1-1/8" | 1 1/4-7 | 1 1/8-12 |
| M36 x 4 | M36 x 3 | 1-3/8" | 1 1/2-6 | 1 1/4-12 |
* Calculated with: HB = 0,95 · HV
Let Us Help You Find Efficiencies